Washing machine faucet leak how to do the installation of washing machine inlet pipe

Washing machines are one of the household appliances that every household needs, especially during the winter. However, the leakage of the faucet of the washing machine is believed to be a condition that many people have encountered. This situation not only wastes water, but also brings a lot of inconvenience to life. So, how to do the leaking washing machine faucet ? Today Xiao Bian came to solve this problem for everyone.

1, washing machine faucet leak how to do

a, tap water sealing tape problem

Damaged faucets are common in life. Most of them are because the fixing screws that hold the faucet are damaged by the sealing tape. In this case, we can only use a wrench to remove the faucet, and then Reinstall the new sealing tape at the place where the screw is fixed and the problem is solved.

b. Axial shim wear in the faucet

If water leakage occurs after the water tap is tightened, it is because the outlet of the water tap leaks because the shaft washer inside the water tap is worn out. Under such circumstances, we should use pliers to press the water. The cover is loose and then removed. Replace with a new shaft washer.

c. Triangular seal wear in the gland

In addition, there is a situation where the faucet is leaking from the washing machine . The triangular seal inside the gland finds a strong wear and then causes a leak in the gap below the faucet. In this case, the screw can be turned and removed, the cover can be loosened and removed, and the inside triangular seal of the gland can be removed and replaced with new one.

2, the installation of the inlet pipe of the washing machine

a. Before the repair, we should first understand the fitting of the washing machine inlet pipe. Do not rush to install when you get the tube. They should be disassembled first. The two hands are held in the white and blue parts. The white part's connector is similar to the mouthpiece of the washing machine tap, so that the next step can be performed.

b. Then, the leading end of the washing machine should be inserted into the pipe joint of the washing machine. Avoid direct hard plugging. It is necessary to press down the blue part and insert the entire tap. After the installation is complete, it should be checked well. If there is no problem, it can be used for boiling water test.

Xiao Bian concludes: The relevant information about the water leakage of the washing machine faucet is introduced to this side and it is all over. Many people like to tighten the faucet after using the faucet, thinking that this will prevent the water from coming out. In fact, the correct method of using the faucet is light. Light the switch to open, not too hard or repeated rotation, this will only cause a reaction.